O.M.LER srl DAL 1974
The company O.M.LER srl was established in 1974 from the Lerda family and during the years it expanded a lot. From 2014 the company has specialised in manufacturing and selling worldwide the pneumatic decoring hammer for foundry. The hammer is produced in the models RVC70 and AF1470 and each one is available in three different versions.
The decoring hammer is used to remove the sand core from foundry castings for the automotive industry. Furthermore, it is suitable also to break the ceramic shell on the casting tree of castings generated through the investment casting process.
MANUFACTURE DECORING BENCHES
O.M.LER avails itself of the technical expertise and of the know-how of its employees to design and manufacture decoring benches and the new and innovative decoring machine DCB18.
The decoring benches are produced according to the customer’s needs. They are decoring stations where the casting is fixed in a pre-defined housing and the hammers, from 1 up to 4, are fastended in the structure in an horizontal or vertical position. Every decoring bench is placed inside a soundproof cabin. The innovative decoring machine DCB18 has housings where from 2 up to 4 castings can be fixed.
The castings are in this way decored at the same time using at least 2 hammers each.
During the beating process the machine can rotate up to 360° in both directions of rotation. The machine is placed in a soundproof cabin according to the in force Euopean law.
O.M.LER will be an exhibitor at Metef 2021 in BolognaFiere - 25/27 March 2021
For further information: www.omlersrl.com